Generally, Swann is a leading brand in the CCTV market. These are advanced surveillance gadgets that meet all the security needs of the modern era. In addition, if you recently bought a new camera from this brand, then Swann security camera installation is a primary step to access and use it.
Additionally, installation starts by connecting the hardware of your security device first. So, if you are seeking assistance with the swann floodlight security camera installation or other models, then must read this brief post. You find detailed information here about the Swann camera installation and more, so stay tuned!
How to install Swann security cameras efficiently?
Moreover, when you are beginning the procedure of Swann security camera installation for the first time, then ensure to have a stable internet connection, an HD TV, an NVR/DVR, and a preferred location. After that, you unbox the camera and check its components.
Additionally, check the user manual very first to start the installation of a DVR or NVR camera as steps vary for both. In this section, we shed light on the primary steps for the security device installation. Let’s have a look beneath:
Connecting Hardware
- Firstly, unbox the camera and check that all the mentioned components are present in it and are in good condition.
- After that, gather all the necessary things in a single place, like on a table or in the same room where a nearby power supply source is present.
- Next, bring the extension cable and connect it to the camera and the other end to the NVR’s back panel.
- Afterward, you can connect the other units of the security device in the same manner.
- Further, take an ethernet cable and join one end to the NVR’s port and another to the router’s port.
- Hereon, connect the mouse to the USB port of the NVR system.
- Also, you need to connect a storage device to the front of the NVR system to store the recordings and for firmware updates.
- Again, take an HDMI cable and plug in one end to the HDMI port on the rear panel of the NVR system and the other end to the HDMI port of the HD TV/monitor.
- After that, to connect the NVR to the VGA monitor, get a VGA cable and join it to the VGA port of the NVR system.
- Similarly, connect the other end to the VGA port of your HD monitor.
- Now, plug in the power adaptor to the NVR and the other end to the AC power outlet.
- Next, turn on the NVR system, set up wizard, and language selection is shown on your monitor.
- Here, the swann floodlight security camera installation for indoor/outdoor is complete till half.
- The same is done for the other Swann CCTV models too to proceed with Swann security camera installation.
Location Selection
- First and foremost, select the appropriate location where you want to position your camera.
- Now, bring the screws, drill machine, pencil, mounting plate, and camera to begin the Swann security camera installation.
- Hereon, check that there are no obstructions where you place your surveillance device.
- Next, mark the position of the holes using a pencil or marker.
- Further, dig the holes using the drill machine and mount the camera surface and brackets.
- You can also consider the user manual to find out more about how to install Swann security cameras.
Mount the camera
- When you are done with the hardware connection, then power off the NVR system.
- Now, take the camera and mount it to the brackets you recently fixed.
- Afterward, tilt the camera to the right angle and check that it is not facing the direct sunlight.
- Next, turn on the camera if it is battery-operated otherwise, release the power supply.
- Similarly, turn on the NVR system and test your security cameras.
- Check the monitor as it shows all the connected cameras.
- After that, install the Swann Security app on your smartphone (Android/iOS).
- Here, create a user account and access your CCTV cameras.
- Finally, the Swann security camera installation is finished now.
Bottom Line
In a nutshell, the given information will assist you in carrying out the Swann security camera installation efficiently. This brief post guides you through the detailed steps from choosing the location to testing your cameras. If looking for more human assistance, then drop us a line here!